Besøk vår spennende butikk i Tønsberg!
Til kassen
Totalt: 0

Meny

Logg inn

Handlekurv / 0 produkter

Handlekurven er tom

Usikker på hvor du skal starte?
Se våre nyheter
TOTALT 0,-
Besøk vår spennende butikk i Tønsberg! | Frakt fra 99,-

Soundtraxx - Blunami BLU-4408 trådløs lyddekoder, 4 amp

10-20 dagers leveringstid
Art.nr: BLU4408
3.090,-
Vennligst velg

Soundtraxx - Blunami BLU-4408 trådløs lyddekoder, 4 amp

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

4 amp Blunami-dekoder for større skalaer. Med skruterminaler for superenkel montering. Velg din lydprofil ved å trykke på knappen over!

Mål: 69 x 30.5 x 14mm

Blunami er en fantastisk og revolusjonerende nyhet fra Soundtraxx! 

Denne dekoderen fungerer som vanlig på alle vanlige DCC digitalsentraler, men i tillegg kan du styre den direkte fra din mobiltelefon via en egen app. Det betyr at du egentlig ikke trenger en digitalsentral i det hele tatt for å kjøre lok med denne dekoderen. Spesielt praktisk for hagejernbane/LEGO eller liknende som har om-board batteri. Du slipper også all mulig avansert CV-programmering. Her velger du lydene du vil ha rett fra Blunami-appen. 

Fungerer med alle Soundtraxx og vanlige ESU-høyttalere.

 

Produsentens info:
 

Large scalers rejoice!

The Blunami BLU-4408
The BLU-4408 is designed to wirelessly operate models with higher stall currents such as some S, O, and large-scale locomotives; this decoder features easy-to-use terminal blocks for no-fault wiring and a higher audio amplifier for awesome volume, indoors or out. Blunami decoders can be operated in three different ways: DC, DCC and Wireless mode. Using the Blunami app (iOS versions 8 or later), you can operate your locomotive with incredible ease of use. You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. We also offer a large selection of selectable sound effects including: exhaust chuffs(10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos and more!

Need Help Choosing a Sound Profile?
We have tons of sounds to match a wide range of locomotives. So many, in fact, we cannot fit them all on one decoder. Therefore, they are broken up into sound profiles of like sounds (Steam, EMD, GE, Electric, etc.). If you don't know which sound profile you need, the best place to start is the Sound Selection References. These will list all the prime movers or exhaust chuffs available on each sound profile. If you need further assistance explore these links: 

DYNAMIC DIGITAL EXHAUST 
For added realism, you’ll love our reactive Dynamic Digital Exhaust (DDE) feature. When your locomotive is traveling across flat terrain and simply maintaining speed, you will hear your locomotive chugging along. But, when the locomotive encounters a grade and the engineer applies more throttle to get the train up the hill, the engine sounds will automatically react and reflect the increase of power needed to crest the hill. DDE accomplishes this by calculating the changes in strain or load on the motor and adjusting the exhaust to appropriately simulate the work the engineer would be doing to the throttle of the engine. This gives Tsunami2 the ability to create the most realistic experience possible.

HIGH QUALITY SOUND LIBRARY
Our large selection of high quality sound effects include: 

  • 10 Exhaust Chuffs
  • Up to 12 Prime Movers in each sound profile 
  • Up to 12 Bells 
  • 90 Whistles
  • 40+ Airhorns
  • Additional couplers, dynamos, cab chatter and more!

ADDED REALISM
Additional realism can be simulated by adding functioning locomotive and train brakes, injectors, power reverse, firebox flicker and more.

EASY INSTALLATION
No soldering required! This decoder features easy-to-use terminal blocks for no-fault wiring.

This 4-amp, universal-style format decoder includes a connector to easily add a CurrentKeeper (P.N. 810140 or 810160) to maintain performance over dirty track and switches.

Dimensions: 69 x 30.5 x 14mm 
Max. Motor Stall Current: 4A
Max. Function Current: 400mA (each output)
Function Outputs: 8
Audio Amplifier: 3 Watt, 8-Ohm Load
DCC Track Voltage: 7V – 27V
Sound Channels: 16
 
Blunami Owner's Manual
Blunami Installation Guide
Blunami Steam User's Guide
Blunami Diesel User's Guide
Blunami Electric User's Guide
 
Blunami Sound Selection References:
Blunami Steam-2 Sound Selection Reference
Blunami EMD Sound Selection Reference
Blunami EMD-2 Sound Selection Reference
Blunami GE Sound Selection Reference
Blunami ALCO Sound Selection Reference
Blunami Baldwin & Others Sound Selection Reference
Blunami Electric Sound Selection Reference
 
Blunami Sound Samples
Blunami Steam-2 Sounds
Blunami EMD
Blunami EMD-2 Sounds
Blunami GE Sounds
Blunami ALCO Sounds
Blunami Baldwin & Other Diesel Sounds
Blunmai Electric Sounds
 

Relaterte produkter

×